Reinforced clamp saddle 250 x 80

Reinforced clamp saddle 250 x 80

R458,52

Reinforced clamp saddle 250 x 80

Key Specifications

Main Pipe Diameter: 250 mm

Branch Outlet Size: 80 mm

Pressure Rating: PN10 (10 Bar)

Bolts Required: Typically uses 6 bolts for sizes 250mm and above to ensure uniform clamping force.

Clean the exterior surface of the main 250mm pipe thoroughly to remove dirt and grit.

Position the rubber O-ring seal properly into the groove of the top saddle half.

Place both halves around the pipe and insert the bolts through the designated slots.

Tighten the nuts evenly in a crisscross pattern with a socket set to maintain balanced pressure.

Drill a hole through the center of the saddle into the pipe while taking care not to damage the internal rubber seal.

SKU: CS250080R Category: Clamps Tags: clamp saddles, Reinforced clamp saddles, reinforced clamps

Description

A reinforced clamp saddle 250 x 80 is a heavy-duty plumbing and irrigation fitting used to branch an 80mm outlet off a 250mm main pipe.

It features a stainless steel or metal reinforcing ring around the bolt area to handle up to 10 bar of working pressure.